English | German | Russian | Czech

rpm English

Meaning rpm meaning

What does rpm mean?

rpm

(= rev) rate of revolution of a motor the engine was doing 6000 revs

Synonyms rpm synonyms

What other words have the same or similar meaning as rpm?

Examples rpm examples

How do I use rpm in a sentence?

Movie subtitles

My engine is losing rpm's.
Can only turn up 1800 rpm.
Losing rpm's steadily.
RPM surging. Everything else is OK.
Give me minimum rpm on both shafts. Steer 140.
Change the speed, you're on 78rpm.
I bought a little 45 rpm.
Batcentrifuge at 32,000 rpm.
An electromagnetic RPM controller.
Both main engines at 50 rpm.
Both engines indicate 50 rpm.
Both main engines 50 rpm.
When you shift the gear, and the needle on the tach reads 9,000 rpm, that's bad.
RPM dropping!
RPM surging.
Increase scanning speed 20 rpm's.
Scanning now, 20 rpm's.
Now, look, put the blood into the centrifuge and rotate it 1500 rpm for one minute.
Do you have a 30-rpm tape recorder?
Twin ceramic rotor drives on each wheel. Computer controlled anti-lock brakes. 200 horsepower at 12,000 rpm.
Inside of a car is an internal combustion engine. composed of many precision parts running at a high RPM.
High RPM produces friction. friction produces heat.
Most of you see just a hunk of metal. Not me. This is hundreds of parts working at high rpm. 800 horsepower, tolerances of 1000.
I think I can get this two-cycle motor up to 33,000 rpm's.
But I think I'm gonna go with 4200 rpm.
This is a ten-cylinder, 1 340 horsepower, at 720 RPM, diesel engine.
Change the speed, you're on 78 rpm.
Computer controlled anti-lock brakes. 200 horsepower at 12,000 rpm.
Don't use too much RPM.
Rpm's all over the shop.
When I pull this switch, the materni-Fuge will spin at 10,000 rpm. Separating out everyone who isn't the mother. Father.
The rotor rpm is dropping.
I'm losing starboard engine. Increasing power to 2800 rpm.
Check starboard-engine manifold pressure. - It's good, but rpm's are low.
You know, some automotive yoga could really lower your RPM's, man.
Probably about six rpm, so you won't wake all the neighbors.
Maintain condenser fans at 38000 RPM. Compression density approaching firing threshold.
This is the gear lever, here is the compass, here is the RPM indicator. and the oil pressure, the temperature of the water.
In a car, you can go from 1000 rpm to seven or 8000.
At 3400 RPM. It can cut through steel like it was wuer.